Miele KM5656 - Manual (Page 12)

Automatic reset
To ensure the cooktop functions
properly the touch controls will
automatically reset:
– when the cooktop is connected to
the electrical supply,
– if there is an interruption to the
electrical supply, and
– during use in response to changing
light conditions.
During the automatic reset of the touch
controls the Child Safety Lock indicator
will light and the cooktop cannot be
turned on.
If the automatic reset could not be
completed an
A will appear in the rear
left burner display and an F will appear
in the rear right burner display. The
front left and front right burner displays
will show numbers.
Manual reset
^ Make sure no direct light (sun or
artificial) beams onto the cooktop.
The surrounding area of the cooktop
should not be completely shaded or
brightly lit.
^ Make sure the cooktop and the touch
controls are not covered. Remove all
pots and pans and clean the cooktop
if necessary.
^ Trip the circuit breaker to the cooktop
or disconnect the appliance from the
power supply for 1 minute.
The touch controls will automatically
reset when power is restored.
If the problem persists, contact
Technical Service.
Resetting the touch controls
12