Maytag MDG-75 - Manual (Page 47)

43
THE DATA LABEL
1. MODEL NUMBER
The model number is a number, which describes the size of the dryer and the type of
heat (gas, electric, or steam).
2. SERIAL NUMBER
The serial number allows Maytag Corporation to gather information on your particular
dryer.
3. MANUFACTURING CODE NUMBER
The manufacturing code number is a number issued by manufacturer, which describes
ALL possible options on your particular model.
4. TYPE OF HEAT
This describes the type of heat for your particular dryer: gas (either natural gas or
liquid propane [L.P.] gas) or steam.
5. HEAT INPUT (for GAS DRYERS)
This describes the heat input in British Thermal Units per Hour (BTUH).
6. ORIFICE SIZE (for GAS DRYERS)
Gives the number drill size used.
7. ELECTRIC SERVICE
This describes the electric service for your particular model.
8. GAS MANIFOLD PRESSURE (for GAS DRYERS)
This describes the manifold pressure taken at the gas valve tap.
9. APPLICABLE APPROVAL SEAL(S)
I.E., Canadian Standards Association International.