Miller Electric XLix - Manual (Page 8)

Page 6
Lens Delay Control
The lens delay control is used to slow the lens-switching time to the clear state after
welding. The delay is particularly useful in eliminating bright
after-rays present in higher amperage applications where the molten puddle re-
mains bright momentarily after welding. Adjusts from 0.10 second (Min) to 1.0 sec-
ond (Max).
Low Battery Indicator
The low battery indicator lights when 2−3 days of battery life remain.
Replace the battery with a readily available coin type CR2450 Lithium Battery or
equivalent. (Miller Part No. 217043) (see Section 4).
NOTES