Menu operation (continued), En-25 – MITSUBISHI ELECTRIC Mitsubishi LCD Projector FL7000U User Manual

Page 25

Advertising
background image

EN-25

3. FEATURE menu

FEATURE

AUTO

AUTO

opt.

MENU POSITION

VIDEO SIGNAL

?

ASPECT

RESET ALL

English

LANGUAGE

A

Ë

OK

SCART INPUT

DISPLAY
INPUT

PASSWORD
FUNCTION

CINEMA MODE

AUTO

1.

SETUP

AUTO

OFF

ITEM SETTING

FUNCTION

ASPECT

AUTO

Select to change the aspect ratio automatically depending on the input
signal. (Select this option for normal use.)

16:9 (FULL)

Select to project images in full size (1920 x 1080 pixels) irrespective of
type of input signal.

REAL

Select to project images in their original size as input.

PASSWORD FUNCTION

Use to enable or cancel the password lock. See page 33 for details.

MENU POSITION

2 options

Use to change the position of the menu.

CINEMA MODE

AUTO

The fi lm mode will be automatically activated when a fi lm source signal is
input.

Select AUTO for normal use.

When

fl icker occurs on the screen, frame dropping or other incorrect

display occurs, or jaggies on slanting lines are remarkable, select either
FILM or VIDEO, which improves the symptom better.

FILM

Fixed to the fi lm mode.

VIDEO

The

fi lm mode will not be activated.

VIDEO SIGNAL

8 options

When AUTO is selected, the appropriate video format is automatically
selected depending on the input signal. If the image isn’t displayed
correctly, select the desired video format manually.

SETUP

AUTO

Select to change the SETUP mode automatically.

OFF

Select to make black lighter.

3.75% / 7.5%

Select to make black thicker.
• When 7.5% is chosen, the brightness is decreased by the set-up can-

cel function for the U.S. Choose OFF when the image is dark.

SCART INPUT

ON / OFF

Choose ON when connecting the projector with a device equipped with
the SCART terminal that can output RGB signal. SCART terminal is used
mainly in Europe. Choose OFF normally. (Available only for the input signal
from the COMPUTER/COMPONENT VIDEO IN 2 terminal.)

LANGUAGE

12 languages

Use to select the language used in the menus.

RESET ALL

OK

Use to reset the settings of the menu (excluding IMAGE CAPTURE,
PASSWORD FUNCTION and LANGUAGE) to the factory setting values.

• CINEMA MODE can be adjusted only when a TV60, TV50, 480i, 576i or 1080i signal is being displayed.
• When SCART INPUT is set to ON, nothing is output to the external monitor.
• When SCART INPUT is set to ON, normal computer signals aren

’t projected.

• Use a commercially available SCART-Mini D-SUB 15-pin cable when connecting this projector with an AV device equipped

with the SCART terminal.

• Some AV devices equipped with the SCART terminal aren

’t compatible with this projector.

Menu operation (continued)

Advertising