Monarch Instrument Paxar 9450 - Manual (Page 22)

Loading for Non-Peel Mode ––––––––––––––––––––––––––––––––––
In non-peel mode, supplies can be either die-cut or butt cut
with a maximum size of 2.2 inches.
n
If you have special label requirements, contact Monarch at the
number listed in the back of the handbook.
To load supplies for non-peel mode:
1. Remove the supply holder and any supply that remains.
2. Turn printer on.
3. Tilt the top of printer slightly back.
Supply
Holder
9450 Operator’s Handbook
2-6