Monarch Instrument Paxar 9450 - Manual (Page 37)

Chapter 6. Troubleshooting
This chapter explains how to
✦ print a test label.
✦ read the LED indicator.
✦ clear errors.
✦ solve any problems that may occur.
Printing a Test Label ––––––––––––––––––––––––––––––––––––––––
To print a test label, press [Feed] while you connect the
battery. Continue to press [Feed] until the LED indicator turns
amber. The LED indicator goes out. A test label prints
automatically and the printer goes into sleep mode.
Software
Version
Print Mode
Baud Rate
Communications
Parameters
Flow
Control
Sleep Delay Timeout
(in seconds)
Total # of
millimeters
printed on this
printer to date
Font ID’s
resident in
the printer
6-1