Monarch Instrument Paxar 9450 - Manual (Page 24)

Removing Supplies –––––––––––––––––––––––––––––––––––––––––
To remove supplies:
1. Remove the supply holder as shown.
2. Cut or tear the supplies as close to the supply guide as
possible, and remove the supply roll.
3. Push the printhead lever up to open the printhead.
c
Do Not back the labels through the printhead or a supply jam
may occur.
4. Turn the knob clockwise to feed the supply out the supply
chute.
Supply
Chute
Supply
Holder
Knob
Printhead
Lever
Supply
Guide
9450 Operator’s Handbook
2-8