Cooking with auto-heat 17, Cooking with auto-heat – Miele KM 5860 User Manual
Page 17
Cooking with Auto-heat
When Auto-heat has been activated,
the burner automatically turns on at the
highest setting (heat-up boost) and
then switches to the previously selected
continued power level. The heat-up
time depends on which continued
power level has been chosen (see
chart).
With higher continued power levels only
a relatively short heat-up time is
required.
To activate Auto-heat
^ Touch the desired continued-cooking
number until a signal sounds, and the
selected continued power level starts
to flash.
During the heat-up time (see chart) the
continued power level flashes.
Changing the continued power level
deactivates Auto-heat.
With extended power levels (see
"Programming"), when an intermediate
power level is selected the power levels
before and after the intermediate power
level will flash.
To deactivate Auto-heat
You can turn off the heat-up boost
before the heat-up time ends.
^ Touch the continued power level until
the display stops flashing; or set a
different power level.
Continued
power level*
Heat-up time
(approx.) min:sec
1
1 : 20
1+
2 : 00
2
2 : 45
2+
3 : 25
3
4 : 05
3+
4 : 45
4
5 : 30
4+
6 : 10
5
6 : 50
5+
7 : 10
6
1 : 20
6+
2 : 00
7
2 : 45
7+
2 : 45
8
2 : 45
8+
2 : 45
9
-
* The continued power levels 1+ etc.
are only available with the extended
power-level settings (see
"Programming").
Use
17