Milan Technology MIL-S1600 - Manual (Page 20)

Figure 5-1. Connecting the MIL-S1600 to a terminal via RS-232 cable
After connecting the Switch and PC, run a terminal emulation program
or Hyper Terminal to match the following default characteristics of the
console port:
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bit: 1
Control flow: None
Figure 5-2.
The settings of
communication
parameters
After you have finished parameter settings, press “ Enter “ Key and the Main
Menu of console management appears.
17