Milan Technology MIL-S1600 - Manual (Page 8)

LED Indicators
The LED Indicators give real-time information on operational status. The
following table provides descriptions
of LED status and their meaning.
Figure 2-2. LED indicators
LED Status Description
Green Power On
Power
Off Power is not connected
Green
This switch is trunking into another MIL-S1600, MIL-SM801 or
MIL-SM800 switch
Trunking
Off No trunking, which is the default
Green The port is operating at the speed of 100Mbps
100M
Off No device attached or in 10Mbps mode
Green The port has link established with a device
Blinks The port is receiving or transmitting data LK/ACT
Off No device attached.
Yellow The port is operating in Full-duplex mode.
Blinks A collision is occurring on the port. FD/COL
Off No device attached or in half-duplex mode
Table 2-1. Description of LED Indicators
5