Moxa Technologies DE-211 - Manual (Page 13)

2-3
Wall Mount
For many industrial applications, you will find it convenient to mount NPort
Express on the wall, using two screws, as indicated below.
STEP 1: Screw two screws, separated by 7.8 cm, into the wall. The heads of the
screws should be no greater than 6.5 mm in diameter, and the shafts
should be no greater than 3 mm in diameter. Do not screw the screws in
all the way—leave a space of about 2 mm to allow room for sliding the
NPort Express unit’s ears between the wall and the screws.
STEP 2: Insert the two screw heads
through the large parts of the
keyhole shaped apertures, and
then slide NPort Express
downwards, as indicated.
STEP 3: For added stability, simply
tighten the two screws.
To remove NPort Express from the wall mount, simply reverse Steps 2 and 3.