Enabling a user-supplied terminator, Enabling a user-supplied terminator -10 – Moxa Technologies DE-211 User Manual
Page 24
Advertising
3-10
Enabling a User-Supplied Terminator
When using the terminal block, you may install your own external terminator
resistor by connecting the ends of the resistor directly to inputs 2 and 3, or by
connecting the two ends of the resistor to the wires that emanate from inputs 2 and 3,
as shown in the following diagrams.
Enabling a user-supplied Terminator on-the-wire
Enabling a user-supplied Terminator on-the-block
Advertising