Moxa Technologies NPort 5110 Series - Manual (Page 11)

3 3
Chapter 3
Initial IP Address Configuration
When setting up your NPort 5110 for the first time, you should first configure the IP address. This
chapter introduces the method to configure the device server’s IP address. For more details about
network settings, see the Network Settings section from Chapter 5, Web Console Configuration.
This chapter includes the following sections:
! Initializing NPort 5110’s IP Address
! Factory Default IP Address
! NPort 5110 Administration Suite # recommended configuration method
! ARP
! Telnet Console
! Serial Console (19200, n, 8, 1)