Moxa Technologies NPort 5110 Series - Manual (Page 42)

NPort 5110 Series User’s Manual Web Console Configuration
5-20
Pair Connection Slave Mode
TCP alive check time
Setting Factory Default Necessity
0 to 99 min 7 min Optional
0 min: TCP connection is not closed due to an idle TCP connection.
1 to 99 min: NPort 5110 automatically closes the TCP connection if there is no TCP activity for
the given time.
Local TCP port
Setting Factory Default Necessity
1 to 65535 4001 Required
The ”Local TCP port” is the TCP port that NPort 5110 uses to listen to connections, and that other
devices must use to contact NPort 5110. To avoid conflicts with well known TCP ports, the
default is set to 4001.