Route preferences (vehicle navigation only), Navigation mode (vehicle navigation only), Detour options (vehicle navigation only) – Magellan CrossoverGPS 980890-05 User Manual

Page 59

Advertising
background image

Setting User Options

44

Route Preferences (Vehicle Navigation only)

You can turn automatic re-routing on or off. With automatic re-routing on, the receiver will

automatically recalculate the route whenever you leave the planned route.

Automatic Re-Routing: When checked, automatic re-routing is on.

Navigation Mode (Vehicle Navigation only)

You can select whether the Car/Motorcycle or Pedestrian mode should be proposed by

default when calculating a route. This navigation mode can always be overridden when

you select your destination.

Detour Options (Vehicle Navigation only)

The Magellan CrossoverGPS detects when you are on a route and moving slowly or not

moving at all on a motorway. It then provides you with the option of detouring around the

problem area. It can alert you visually on the map by displaying the detour icon or you can

set it not to alert you so you can select detour from the main menu yourself.

3 mi/5 mi/10 mi (5km /10km/15km) or Custom: This setting determines the

distance that the detour will take you around. (If you are stationary on a motorway

and select detour, the Magellan CrossoverGPS will calculate the detour and try to

get you back on the original route in the distance specified.)

Enable automatic detour: This defines if the detour icon will be shown on the map

when the Magellan CrossoverGPS determines that a detour should be used.

Alert After: This sets the duration when you are stationary or moving slowly on the

motorway before a detour icon is displayed.

Example: Settings of ‘3 mi’, ‘Enable automatic detour’ on, and ‘Alert After’ set to 1

min. You are being routed on a motorway and have been moving at 10 mph due to

a traffic jam ahead. After 1 minute of moving slowly, the detour icon will be

displayed on the left side of the map indicating that a detour should be used. If

you want to activate the detour, press on MENU and select ‘Detour’. Press ‘Route’

and the Magellan CrossoverGPS will calculate a new route, detouring around the

next 3 miles.

Advertising