Push the control dial in to start, Step 4 – Maytag MD-1 User Manual

Page 5

Advertising
background image

4

Note:

Using the Air Fluff temperature setting will

require a longer drying time.

Note:

The dial can be turned in either direction to

select a cycle. Once started, the dial will not
advance at a specific rate during the Auto Dry
cycles. At first the dial may not advance at all.
Toward the end of the cycle (when the load begins
to dry), the dial will advance at a more regular rate
and much more quickly. This is normal operation.

Damp Dry

(select models)

Damp Dry is located on the Time Dry/Air Fluff section
of the dial. It is designed to partially dry items and can
be used with any temperature selection. Damp Dry will
provide 20 minutes of tumbling time, followed by
10 minutes of cool-down tumbling.

Time Dry/Air Fluff

This cycle can be used to regulate the drying time. Use
with Air Fluff, Delicate, Medium (select models) or
Regular temperature settings. For timed drying, turn
the control dial until the pointer points to the proper
time setting in the Time Dry/Air Fluff cycle.

STEP

4

Push the Control Dial in
to Start

Push the control dial in to start the dryer. The dryer
door must be closed for the dryer to start.

Cycles and options may vary by model.

Advertising