MACKIE TT24 User Manual
Page 39
Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7
39
Additional Controls
Snake assigned to channel
Snake not assigned to channel
If a snake is assigned to an input channel, the following additional controls are shown for the
channel overview:
Mic Pre Gain
Pad
48V
Snake Digital Trim (note that this is a different parameter
than the digital trim shown when a snake is not assigned –
see gain compensation in section 3.1 or more information)
If a single snake input is routed to more then one channel, then all channels fed by the snake
input will see and have control of the same mic pre. This is because there is only a single mic
pre, pad, and +48V for each input in the snake, and it therefore will affect all channels fed by
that snake input. All snake digital trims are independent per channel.