MACKIE TT24 - Manual (Page 40)

Mackie TT24 Digital Live Console Owner’s Manual Addendum v1.7
40
2.5 Snapshot Filtering
Routing
Routing is saved in a snapshot and is fi ltered with three new “routing” fi lter buttons:
• Inputs – Filters out all Input routing changes
• Outputs – Filters out all Output routing changes
• U-Net – Filters out all U-Net (A to B and B to A) routing changes.
Unless fi ltered, loading a snapshot will change the entire console routing to that stored in
the snapshot. When fi ltered, a snapshot will not recall any corresponding routing changes.
Note that when doing U-Net routing, it usually makes sense to either enable or disable all
three routing buttons at once since U-Net routing generally requires input and output routing
changes as well. Two other (non-routing) fi lters are also added: LP48 and Mic Pre, and you
can fi lter the card channels on Bank 3.
Snapshot
Filtering
Example
New Snapshot Filters