MSI IM-945GSE SERIES MS-9830 - Manual (Page 40)

2-12
MS-9830 Mainboard
Serial ATA Connector: SATA1, SATA2
This connector is a high-speed Serial ATA interface port. Each connector can con-
nect to one Serial ATA device.
Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise,
data loss may occur during transmission.
Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is
opened, the chassis intrusion mechanism will be activated. The system will record
this status and show a warning message on the screen. To clear the warning, you
must enter the BIOS utility and clear the record.
JCI1
2
G
N
D
C
IN
T
R
U
1
SATA1 SATA2
PDF created with pdfFactory Pro trial version www.pdffactory.com