Power – MSI IM-945GSE SERIES MS-9830 User Manual
Page 73
3-25
BIOS Setup
Power
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Power Off]
Leaves the computer in the power off state.
[Power On]
Leaves the computer in the power on state.
[Last State]
Restores the system to the previous status before power
failure or interrupt occurred.
Resume On LAN
This field specifies whether the system will be awakened from power saving modes
when activity or input signal of onboard LAN is detected.
Resume On PME#
W hen setting to [Enabled], this setting allows your system to be awakened from the
power saving modes through any event on PME (Power Management Event).
Resume On RTC Alarm
W hen [Enabled], your can set the date and time at which the RTC (real-time clock)
alarm awakens the system from Suspend mode.
PDF created with pdfFactory Pro trial versi