Manitowoc Ice Q300 - Manual (Page 13)

Section 2 Component Disassembly
2-1
Disassembling the Dispenser Parts
For Cleaning
WARNING
Unplug unit before servicing or cleaning.
The agitator is operated by a timer and can agitate at
anytime.
Electric Shock Hazard.
1
Shut off water to ice machine.
2
Locate a cylindrical object, such as a ballpoint
pen with a cap on the pen.
Insert the pen into the left and right black rubber
holes in the top of the front panel of the
dispenser.
This action releases the two clips which hold the
dispenser front panel in place.
While applying pressure on the pen, pull the
front panel forward slightly, so the clip in the
panel does not snap back into place.
3
Hold the front panel of the dispenser on both
sides and tilt the panel forward. The front panel
will be resting on the catch hooks at the bottom
of the panel.
4
QFA-291 ONLY - Disconnect water line at the
front panel “quick disconnect” fitting.
Black rubber
holes
Dispenser
Front
Panel
Catch
Hook