Manitowoc Ice Q300 - Manual (Page 19)

Section 2 Component Disassembly
2-7
Disassembling the Dispenser Parts
For Bin Cleaning
WARNING
Unplug unit before servicing or cleaning.
Ice dispenser bin contains moving parts that can move
at any time and will cause injury if hands are in the
way.
1
Inside the dispenser, rotate the agitator arm so
the paddle wheel pin handle is pointing up,
toward the ceiling.
2
Un-clip the hand-removable paddle wheel pin
from the agitator…
3
…Then remove the paddle wheel pin by firmly
rotating the pin and pulling upward.
4
Push the agitator bar toward the back of the bin
until agitator is free of the paddle wheel hub.
Paddle
wheel
pin
handle
Paddle
wheel
pin
handle
Paddle
wheel
pin
Paddle
wheel
hub