Miele GAS COMBISET CS 1011 - Manual (Page 10)

Burner
g Small burner cap
h Large burner cap
i Burner ring
j Burner
k Ignition safety control
(Thermocouple)
l Ignitor
m Burner base
Positioning the burner parts
The proper function of the burner is only guaranteed if the burner parts are
positioned correctly:
The notch
a on the burner cap must securely fit into the recess of the burner
b.
The notch
c on the burner must securely fit into the recess in the lower part of
the burner base
d.
If the parts are positioned correctly the burner cannot be turned.
Guide to the combiset
10