Miele GAS COMBISET CS 1011 - Manual (Page 12)

Fast-Ignition System
The gas combisets are equipped with a
Fast-Ignition-System which
incorporates the following features:
– The control knob does not need to
be pressed until the flame lights.
– If the flame goes out because of a
draft, for example, the burner is
automatically re-ignited.
If re-ignition is unsuccessful, the gas
supply is automatically interrupted
(see "Ignition safety control").
Turning On/Off and Regulating
The control knob is used to turn the
burner On/Off and to regulate the
strength of the flame.
Description of the settings
ß combiset is turned off
& Highest flame
Outer and inner burners are both at
the highest settings.
& High flame
Outer burner is on the lowest setting;
Inner burner is on the highest setting.
& Low flame
Outer burner is off;
Inner burner is on the highest setting.
& Lowest flame
Inner burner is on the lowest setting.
The knob must only be turned left to
turn the appliance on and right to
turn it off.
If the knob is :
-
turned on without pressing it
down first,
- turned clockwise to turn on,
- used to turn the outside ring on
or off without pressing the knob
down, or
- turned counterclockwise to turn
the combiset off,
parts of the combiset might get
damaged.
Use
12