Mitel 8528 - Manual (Page 48)

Call Features
Page 34 Mitel ® 8528 Telephone User Guide – Issue 2, June 2010
Manual Call Forwarding
The following table describes Manual Call Forwarding options.
To use Manual Call Forwarding:
1. Press the Fwd button or dial the Manual Call Forwarding feature code from the table
above. ENTER FORWARD DEST appears.
2. Enter the extension number or press the Outgoing button, and then dial the phone
number. FWD ALL CALLS TO <number> appears.
To cancel a Manual Call Forwarding request:
Do one of the following:
• Press the Fwd button, and then press (Speaker), or lift and replace the handset. ANY
CALL FORWARD CANCELED appears.
System Forwarding
You can use System Forwarding to route calls based on the type of call and the idle or busy
status of your telephone. You cannot program the System Forward destination. You can only
turn it on or off. Contact your system administrator for more information.
To turn System Forwarding on or off:
Dial 354 to turn System Forwarding on. SYSTEM FORWARD ON appears. Dial 354
again to turn System Forwarding off.
Call Forward Feature Description
Code
Call Forward All Calls All incoming calls are forwarded. 355
Call Forward if no
Answer All incoming calls are forwarded if not answered.
(The timer is set by the system administrator.) 356
Call Forward If Busy When your telephone is busy, all incoming calls
are forwarded without ringing. 357
Call Forward If No
Answer/Busy All incoming calls are forwarded if your telephone
is busy, or if you do not answer. 358