Miele F 456 i-3 - Manual (Page 13)

Before using for the first time
^ Clean the inside of the appliance and
the accessories with luke warm water
and a little washing up liquid and
then dry using a soft cloth.
Important: To ensure correct
functioning of the appliance, let it
stand for between 1½ and 2 hours
after transporting it to its final
location before connecting it to the
mains.
Switching on
^ Using a coin turn the On/Off dial in a
clockwise direction away from the "0"
position.
Forcing it beyond its range would
damage it. Turn it only as far as it will
go, then turn it back again.
The alarm indicator light flashes. An
alarm sounds after a short while and
the appliance starts cooling.
Allow the appliance to cool for a few
hours before placing food in it. This will
ensure that the temperature is
sufficiently low.
Switching off the alarm
^ Press the alarm button.
The alarm stops. The indicator light
remains lit until the temperature which
has been set is reached.
Cool pack
Place the cool pack in the top drawer or
to save space on the freezer tray. The
cool pack will be at its most effective
after it has been in the freezer for
approx. 24 hours.
Switching off
^ Using a coin turn the On/Off dial in an
anti-clockwise direction back to the
"0" position.
All indicator lights go out and the
cooling process is switched off.
Switching on and off
13