Mounting the scanner to a surface, Quick reference guide 5 – Motorola LS7708 User Manual

Page 5

Advertising
background image

Quick Reference Guide

5

For a cable with a Y-connector (containing both power and interface connectors):

1.

Connect the power and interface cables to the appropriate ports.

2.

Route the cables according to the following diagram.

Mounting the Scanner to a Surface

Caution:

The LS7708 requires use of the mounting bracket for proper
operation and saftley. Failure to use the bracket can result in
scanner instability.

The LS7708 is designed to sit on top of a counter or be mounted to a wall. The slot on
the back of the scanner accepts a mounting bracket to secure it to the mounting
surface. This bracket accommodates either configuration.

Connections to power and
hand-held scanner ports, side exit:
curl power cable and route it back
towards interface cable.

Connections to power and host
ports, side exit: keep power cable
straight and route it ahead with
interface cable.

Plastic Tab

Rubber Feet

Advertising