Connection, When making connections be sure to, When pulling out a cable – Marantz VP-12S2 User Manual

Page 12

Advertising
background image

ENGLISH

8

When making connections be sure to:

• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the plug properly. Any plugs that are not fully inserted often generate a noise.

When pulling out a cable:

• Be sure to grab the plug, not the cable itself.

Connect the supplied AC power cord into the AC IN socket of
the projector.
The STANDBY indicator lights up and the projector goes into
the standby mode.

Note :

Make sure the AC power cord is firmly connected into

the AC IN socket.

You can connect this projector to a VCR, DVD player and other video equipment.

Connecting a video source using S-VIDEO IN and VIDEO IN terminals.

1.

Connect one of the S-video cable to the S-VIDEO IN terminal, or one end of the video cable to the VIDEO IN terminal on the projector.

2.

Connect the other end of the S-video cable or the video cable to the S-video output terminal or video output terminal of the
video source.

Connecting with DVD player using COMPONENT VIDEO IN terminal

1.

Connect each RCA connector of a component cable to the corresponding RCA terminals on the projector.

2.

Connect the other end of the cable to the corresponding terminals on a DVD player.

DVD

VCR

FL OFF

STANDBY

S-VIDEO OUT

VIDEO OUT

COMPONENT VIDEO OUT

Component cable

(commercially available)

Video cable

(commercially available)

S-video cable (commercially available)

Connection with Video Equipments

Connection with AC Power Supply

CONNECTION

Advertising