Miele DA2210 - Manual (Page 15)

Reprogramming the charcoal filter
timer
The active charcoal filters can only be
used in recirculation mode and cannot
be used to exhaust fumes.
The charcoal filter timer is not preset.
Before using the hood in recirculation
mode, the charcoal filter timer must be
programmed.
^ Press the joystick to the left to turn
the fan off.
^ Press the Delayed Shut Down and
charcoal filter buttons at the same
time.
The indicator for the charcoal filter and
one of the fan power scale indicators
will flash.
The indicators of the fan power scale
show the programmed time:
1st indicator from the left = 120 hours
2nd indicator from the left= 180 hours
3rd indicator from the left = 240 hours
4th indicator from the left = unlimited
^ Use the joystick to select the desired
time. Press it to the left for a shorter
operating time, to the right for a
longer operating time.
^ Store the selection by pressing the
charcoal filter button.
All indicators will go out.
If the procedure is not stored within 4
minutes of programming, the hood will
automatically default to the "old" data.
Operation
15