Miele G 7823 - Manual (Page 19)

In operating level C the automatic
mobile unit recognition system (AWK)
allocates programme places from 1 -
15 to mobile units with the correct
coding.
The unit coding (on the mobile unit) and
the programme place with the
corresponding programme (in the
electronic control unit) have to match
each other.
To do this:
^ Each mobile unit must be coded
before being used for the first time
(see "Coding the mobile unit"), and
^ The programme for which the mobile
unit is coded must be allocated to the
correct programme place.
See "System function - Selector switch
organisation" in the Programming
manual for information on how to
change programme positions.
,
Before starting a programme it is
absolutely essential that you check
that the programme shown in the
display is the correct one for the
mobile unit being used.
Otherwise inadequate cleaning or
disinfection could be the result.
Please make sure, that the places
assigned for the programmes using
Automatic mobile unit recognition
are not changed around arbitrarily.
Automatic mobile unit recognition (Optional)
19