Appendix c: technical information, Specifications, Owner’ s manual – MACKIE PPM1008 User Manual

Page 27

Advertising
background image

27

Owner’s Manual

Owner’

s Manual

Appendix C: Technical Information

Specifications

Distortion (THD + N)

(1 kHz, 30 kHz bandwidth)
Mic mono:

<0.007% / <0.005%

Line

mono: <0.005%

Line stereo

<0.01% at main out

Main mix output noise

(1 kHz, 30 kHz bandwidth)
Main mix level down, all channel levels down: –95 dBu
Main mix level 0 dB, all channel levels down: –86 dBu
Main mix level 0 dB, all channel levels 0 dB:

–77 dBu

Frequency Response

(+0 dB / –3 dB)
Mic mono input:

< 10 Hz – 80 kHz

Line mono inputs:

< 10 Hz – 40 kHz

Line stereo inputs:

< 10 Hz – 75 kHz

Equivalent Input Noise (EIN)

Mic input (20 Hz – 20 kHz)
150 Ω termination:

–128 dBu

Gain

Mic mono input:

25 dB / 45 dB

Line mono inputs:

0 dB / 20 dB

Line stereo inputs:

0 dB

Maximum Levels

Mic mono input:

–5 / –25 dBu

Line mono inputs:

+21 / +1 dBu

Line stereo inputs:

+21 dBu

Preamp main and monitor outputs: +21 dBu

Impedances

Mic mono input:

3.6 kΩ balanced

Line mono input:

20 kΩ balanced

Line mono input, Ch 5, 6 Hi-Z:

500 kΩ unbalanced

Main and monitor preamp outputs:

240 Ω balanced

120

Ω unbalanced

Channel EQ

High Shelving (all channels)

±15 dB @ 12 kHz

Mid Mono Channels:

Mid Peaking, sweepable

±15 dB

Mid sweep range:

100 Hz to 8 kHz

Mid Stereo Channels:

Hi Mid Peaking:

±15 dB @ 2.5 kHz

Lo Mid Peaking:

±15 dB @ 400 kHz

Low Shelving (all channels)

±15 dB @ 80 Hz

9-Band Graphic EQ

Main and Monitor 1:

±15 dB @

63, 125, 250, 500, 1k,

2k, 4k, 8k and 16 kHz

Connections

Mic input:

XLR balanced

Line mono input:

1/4" TRS balanced

Line stereo input:

1/4" TRS unbalanced

Preamp main outputs:

1/4" TRS balanced

Monitor outputs:

1/4" TRS balanced

Inserts:

1/4"

TRS

unbalanced

Loudspeaker outputs:

1/4" TS and Neutrik

Speakon

Loudspeaker outputs

(Both channels loaded and driven at 1 kHz.)
Peak output power @ 4 Ω:

2 x 800 W peak

RMS output power @ 4 Ω:

2 x 400 W rms, 1% THD

2 x 500 W rms, 3% THD

RMS output power @ 8 Ω:

2 x 250 W rms, 1% THD

2 x 300 W rms, 3% THD

Recommended load impedance:

4 – 8 Ω per channel

Digital Effects

Processor: 32-bit
I/O:

Mono input /

Stereo

output

Number of presets:

24

Power Consumption

US:

100 – 120 VAC,

50 – 60 Hz, 250 watts

EU:

200 – 240 VAC,

50 – 60 Hz, 250 watts

AC Connector:

3-pin IEC 250 VAC

Dimensions

Height:

12.3 in / 314 mm

Width:

19.3 in / 490 mm

Depth:

11.4 in / 290 mm

Net weight:

25.2 lb / 11.4 kg

LOUD Technologies Inc. is always striving to improve our
products by incorporating new and improved materials,
components, and manufacturing methods. Therefore, we
reserve the right to change these specifications at any time
without notice.
“Mackie,” and the “Running Man” are registered trademarks
of LOUD Technologies Inc. All other brand names mentioned
are trademarks or registered trademarks of their respective
holders, and are hereby acknowledged.
Please check our website in case there are any corrections and
updates to this manual: www.mackie.com.
©2011 LOUD Technologies Inc. All Rights Reserved.

Advertising
This manual is related to the following products: