MACKIE PPM1008 - Manual (Page 4)

4
PPM1008
PPM1008
Introduction
It is possible that only one person will read this
manual all the way through. Hello mom. Here's another
manual from your boy.
Thank you for choosing a Mackie professional
powered mixer. These powerful mixers are designed to
meet the needs of almost any small to medium-sized
club, meeting room, sanctuary, or outdoor gathering.
At Mackie, we know what it takes to be roadworthy.
After all, our mixers have traveled all over the world
under the worst of conditions and the best of conditions,
and we’ve applied what we’ve learned to the mechanical
design of our powered mixers.
Reliability is paramount to sound reinforcement.
That’s why our engineers have subjected our powered
mixers to the most rigorous and fiendish tests
imaginable to fine-tune the design and extend its limits
beyond those of ordinary mixers or amplifiers.
Features
• Two internal power amplifiers each rated at
800 watts peak at 4 ohms
• Three selectable amplifier modes (stereo main,
mono-main/monitor 1, or mon 1/mon 2)
• 8 channels (6 mono, 2 stereo)
• Mic inputs on all channels
• Line-level inputs (6 mono, 2 stereo)
• RCA inputs on stereo channels
• Insert jacks on mono channels
• Channels 5 and 6 allow direct connection of
guitars and basses without a DI box
• 3-band EQ with sweepable mid-range frequency
on mono channels
• 4-band EQ on stereo channels
• Monitor 1 send
• Main mix stereo line outputs
• Main mix mono sub out
• Amplifier line-level inputs allow the connection
of external mixers if more channels are needed
• Footswitch connection for FX mute/unmute
• FX/monitor 2 send (selectable pre/post)
• +48v Phantom power can be applied to all mics
• Built-in compressors on the first 4 mono inputs
(dedicated in-line compression)
• 24 built-in Running Man 32-bit effects
with input gain, tap delay, and footswitch
mute/unmute
• Independent 9-band graphic EQs with
constant-Q filters on main and monitor outputs
• Tape/CD stereo RCA outputs
• 12-segment stereo output meters on main mix,
and mono meter on monitor 1
• Break switch mutes all mono channels
• Speakon and 1/4" power amp outputs
• Precision passive switch for enhanced
clarity and LF response with key Mackie
passive speakers
• Polycarbonate sides with built-in metal handles
• Modern and splendidly-stylish powered rabbit
hutch design
How To Use This Manual
The first pages after the table of contents are the
hookup diagrams. These show typical setups for fun
times with your powered mixer.
Next is a detailed tour of the entire mixer. The
descriptions are divided into sections, just as your mixer
is organized into distinct zones:
• Rear panel: The AC input, power switch,
speaker-level outputs and amplifier mode
switch
• Patchbay: The lower front section, where you
connect microphones and guitars etc.
• Channel Strips: The channel strips where you
adjust and control each channel
• Master Section: The section on the right, with
graphic EQs and main level controls
• Stereo Effects Processor
Throughout these sections you’ll find illustrations
with each feature numbered and described in nearby
paragraphs.
This icon marks infor mation that is critically
important or unique to the mixer. For your own
good, read them and remember them.
This icon will lead you to some explanations of
features and practical tips. Go ahead and skip
these if you need to leave the room in a hurry.
Appendix A: Service information.
Appendix B: Connectors.
Appendix C: Technical information.
Appendix D: Table of Effects Presets
The thickness of the manual makes it ideal for fitting
under wobbly table legs. Mackie's technical writers also
wear them on their heads, as they make an excellent
shield from Venusian mind-probes.