Chapter 2 – activation and installation, Step 1 – activate your wireless account, Step 2 – insert the sim card into the holder – Multi-Tech Systems MTCBA-G-F4 User Manual
Page 10
Chapter 2 – Activation and Installation
Multi-Tech Systems, Inc. MultiModem GPRS Wireless Modem User Guide
10
Chapter 2 – Activation and
Installation
Step 1 – Activate Your Wireless Account
Activate Your Wireless Account
Please see the wireless account Activation Notices located on the MultiModem CD. Choose the one for your
wireless network provider and follow the directions to activate your account.
Phone Numbers for the Wireless Modem
Every wireless modem will have its own unique phone number. The phone number may simply be given to you
by your wireless service provider or it may be on the SIM card or both. Wireless provider implementations may
vary.
Step 2 – Insert the SIM Card into the Holder
The wireless MultiModem requires the power supply connection to begin operation. It also requires a SIM card
(Subscriber Identity Module) to operate on a GSM network. To install the modem, do the following:
1.
Using your fingernail or a small wedging tool (e.g., a small screwdriver), pry off the SIM cover.
2.
Insert the SIM card into the holder.
3.
Verify that the SIM card fits into the holder properly and then replace the cover.