Multi-Tech Systems Multi-Tech FaxFinder FF820 - Manual (Page 16)

Chapter 2: Installation
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 16
Part B: Connecting to Telephony Service
The FaxFinder can either be connected to a PBX
(for use in Automated Routing Mode) or to POTS lines
(for use in Manual Routing Mode).
Connection for
Automated Routing Mode
Connection for
Manual Routing Mode
Plug one end of the phone cable into the
FaxFinder’s LINE jack and the other into an
available Station Port on the PBX. Plug one end of the phone cable into the
FaxFinder’s LINE jack and the other end into
your standard telephone receptacle.
An RJ11-to-RJ11 cable is included with your
FaxFinder.
Automated Routing Mode
Manual
Routing
Mode
COMMAND ETHERNET 8 7 5 3 1 2 4 6
LINE 1 LINE 2 LAN 1 CONSOLE
RESET