Multi-Tech Systems Multi-Tech FaxFinder FF820 - Manual (Page 178)

Chapter 7: Device Manager Operation
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 178
6. The updating process will take as long as a minute. During this time, several messages will
appear in the Update FaxFinder N.N.N.N window. A transient TFTP screen may appear briefly. If
the updating process has been successful, the final message line will say “Finished – The
FaxFinder is ready.” If you chose to update all modems with a single command, it will take about
the same length of time for each modem to be updated.
7. If you are updating the modems one-by-one, repeat steps 1-6 for each modem of the unit.
For consistency of operation, update all POTS modems of all FaxFinder units in the system.
8. The updating process is now complete. Click the “X” in the upper-right corner to close the update
window and return to the main Device Manager screen.