Multi-Tech Systems Multi-Tech FaxFinder FF820 - Manual (Page 48)

Chapter 3: FaxFinder Server Software Screens
Multi-Tech Systems, Inc. FaxFinder Admin User Guide 48
Current Status Screen Field Definitions (cont’d)
Field Name Values Description
System fields group
Up Time x days yy hours:
zz minutes
Operation time since last reboot.
Email Status No Errors,
Bad MailServer
Address,
Mail Server
Connect Failed,
SMTP Invalid
Response, SMTP
Client Timeout
Indicates whether the FaxFinder’s email
transmissions, both faxes and administrative
messages, are proceeding with or without errors.
POTS Modem n fields group
State Waiting for Ring,
Initializing Modem,
Waiting for Connect,
Negotiating, Receiving Page,
Postpage Processing,
Processing, Busied Out
Indicates the modem’s current operating
condition.
Vertical Resolution standard, fine Horizontal resolution is 204 bpi. Vertical
resolution can be either 98 bpi (standard) or 196
bpi (fine).
Width numeric, in pixels Width of received fax.
Connect Time mm/dd/yyyy,
hh:mm:ss For the current fax, the date and time at which
the connection began.
Remote ID numeric (phone
number) or
alphanumeric The fax number or other identifier for the off-
premises fax machine (sender or receiver)
involved with this fax transmission.
Name alphanumeric Identifier or description for the off-premises fax
machine (sender or receiver) involved with this
fax transmission.
Version alphanumeric FaxFinder modem version in use.
Page numeric For the current fax, this indicates the page
number currently being received. “0” indicates
that no fax is currently being sent or received.
Baud Rate 2400, 4800, 7200, 9600,
12000, 14400, 16800, 19200,
21600, 24000, 26400, 28800,
31200, 33600 bps The data transmission speed in bits per second
at which the current fax transmission is
occurring.
Length letter, legal, or
variable Length, in paper size, of the received fax.
Elapsed Time numeric The duration of the current fax transmission in
seconds.
Phone Number numeric The fax number of the off-premises fax machine
(sender or receiver) involved with this fax
transmission.
Initialize Modem (button) Initializes the modem, clearing a busied-out
state. This can only be done by a user with
administrative rights.
Make Busy (button) Imposes a busied state on the modem. This can only
be done by a user with administrative rights.