Four-wire setup – Multi-Tech Systems MT5600BL-V.90 User Manual
Page 30
Chapter 4 - Leased Line Operation
30
Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)
F
F
F
F
Four-
our-
our-
our-
our-W
W
W
W
Wir
ir
ir
ir
ire Set
e Set
e Set
e Set
e Setup
up
up
up
up
1. For four-wire leased line operation, connect one of the provided four-wire cables
to the LEASED jack on the back of the modem. Connect the other end of the
cable to a four-wire leased line jack or terminals supplied by the telephone
company.
2. Turn on the modem.
3. Starting at the
STATUS
screen, press the following buttons on the front panel:
И
И
И
И
И, Ж
Ж
Ж
Ж
Ж, И
И
И
И
И, И
И
И
И
И, И
И
И
И
И, Ж
Ж
Ж
Ж
Ж, Ж
Ж
Ж
Ж
Ж, Ж
Ж
Ж
Ж
Ж, Ж
Ж
Ж
Ж
Ж. The
SYNC, NORM?
screen appears.
4. Press the
Enter
button to select normal synchronous operation.
5. The
OPTION SET
screen appears. Press
З
З
З
З
ЗЕ
Е
Е
Е
Е to exit to the
SYNC/ASYNC
OPTIONS
screen.
6. Press
З
З
З
З
ЗЕ
Е
Е
Е
Е, З
З
З
З
ЗЕ
Е
Е
Е
Е, З
З
З
З
ЗЕ
Е
Е
Е
Е, Ж
Ж
Ж
Ж
Ж, Ж
Ж
Ж
Ж
Ж, Ж
Ж
Ж
Ж
Ж, Ж
Ж
Ж
Ж
Ж, Ж
Ж
Ж
Ж
Ж, Ж
Ж
Ж
Ж
Ж. The
4 WIRE LEASE? ORIG
screen
appears.
7. Choose one of two actions:
• To set up the modem as the originate modem, press
the
Enter
button.
• To set up the modem as the answer modem, press
Ж
Ж
Ж
Ж
Ж to display the
4 WIRE LEASE? ANSWER
screen, and then press the
Enter
button.
Note:
One of the modems in a leased line pair must be configured as the
originate modem, and the other as the answer modem, but it does not matter
which is which.
8. The
OPTION SET
screen appears. Press
З
З
З
З
ЗЕ
Е
Е
Е
Е to exit to the
ONLINE OPTIONS
screen, or
Ж
Ж
Ж
Ж
Ж to exit to the
CURRENT SETTING=
screen.
9. This completes the setup for four-wire leased line operation. Upon completion,
the modem attempts to connect to the modem at the other end of the leased line.
If the remote modem has not yet been configured for leased line operation, you
may turn off the local modem until the remote one is ready.