Appendix b - technical specifications, Appendix – Multi-Tech Systems MT5600BL-V.90 User Manual
Page 51
Appendix B - Technical Specifications
51
Multi-Tech Systems, Inc. MT5600BA/BL Series User Guide (S000276E)
Appendix
Appendix
Appendix
Appendix
Appendix B -
B -
B -
B -
B - T
T
T
T
Te
e
e
e
ec
c
c
c
chni
hni
hni
hni
hnic
c
c
c
cal
al
al
al
al
Spe
Spe
Spe
Spe
Specif
cif
cif
cif
cifiiiiic
c
c
c
ca
a
a
a
at
t
t
t
tiiiiio
o
o
o
ons
ns
ns
ns
ns
Your MultiModemII modem meets the following specifications:
Trade Name
MultiModemII™
Model Number
MT5600BA-V.92, MT5600-V.90, MT5600BL
Server-to-Client
56K or V.92 speeds when accessing a 56K or V.92
Data Rates
server (actual speed depends on server capabilities and line conditions)
Client-to-Client
33600, 31200, 28800, 26400, 24000, 21600, 19200, 16800,
Data Rates
14400, 12000, 9600, 7200, 4800, 2400, 1200, 0-300 bps
Fax Data Rates
14400, 12000, 9600, 7200, 4800, 2400, 300 bps
Data Format
Serial, binary, synchronous and asynchronous
Commands
AT, V.25bis, TIA/EIA TR.29 Class 2
Command Buffer
60 characters
Modem Compatibility
ITU-T V.90, v.92; 56K ITU-T V.34 enhanced, V.34, V.32terbo, V.32bis,
V.32, V.25bis, V.22bis, V.22; Bell 212A and 103/113; ITU-T V.42,
V.42bis; ITU-T V.21 & V.23 in international versions, v.44
Fax Compatibility
ITU-T Group 3, Class 1 and 2, T.4, T.30, V.21, V.27ter, V.29, V.17, and
TIA/EIA TR29.2, V.34, V.17
Error Correction
ITU-T V.42 (LAP-M or MNP 3 and 4)
Data Compression
ITU-T V.42bis (4:1 throughput), MNP 5 (2:1 throughput)
Speed Conversion
Serial port data rates adjustable to 300, 1200, 2400, 4800, 9600, 19200,
38400, 57600, 115200, and 230400 bps
Mode of Operation
Fax online modes; full duplex over dial-up and two-wire or four-wire
leased lines; data mode, command mode, online command mode, V.54
test mode
Flow Control
XON/XOFF (software), RTS/CTS (hardware)
Transmission Level
-11 dBm (dial-up—varies depending on country or region for which the
modem is set), -10 dBm (leased-line)
Frequency Stability
±0.01%
Receiver Sensitivity
-43 dBm under worst-case conditions
AGC Dynamic Range
43 dB
Interface
TIA/EIA RS-232C/ITU-T V.24/V.28
Connectors
DB25F RS-232C connector; two RJ-11 phone jacks (BA model) or three
RJ-11 phone jacks (BL model); power connector
Cables
Three modular telephone cords (USA); country- or region-specific
cordage for International models; one 9-pin to 25-pin serial cable for
International models; external power transformer
Note:
Any cables connected to the computer should be shielded to
reduce interference.