Marantz PMD570 - Manual (Page 14)

- 14 -
EDIT
MARK
M. RESET
REC BAL MARK
DISPLAY
SHIFT
HEADPHONE LEVEL POWER ON/OFF
MENU/STORE
UNDO
SOLID STATE RECORDER PMD570
CANCEL
PUSH ENTER
REC LEVEL/SELECT
MARK TRACK
TOTAL TRACKTIME REC REMAIN kbps A-B L R -dB
PM
kHz
AM
LINE
S.SKIP -dB
over 0 2 6 1
2 20 40 00
0 10
LOCK
Controls and Connections
Front continued
5
TIME
REC REMAIN L
R
-dB over 0 2 6 12 20 40 00
-dB
LINE
L
R
-dB over 0 2 6 12 20 40 00
-dB
LINE
TRACK
L
R
-dB over 0 2 6 12 20 40 00
-dB
MARK
L
R
-dB over 0 2 6 12 20 40 00
-dB
kbps
kHz
L
R
-dB over 0 2 6 12 20 40 00
-dB
TIME
PM
L
R
-dB over 0 2 6 12 20 40 00
-dB
LINE
TRACKTIME
TRACK
L
R
-dB over 0 2 6 12 20 40 00
-dB
TRACKTIME
TRACK
DISPLAY
LOCK
DISPLAY
LOCK
TIME
REC REMAIN L
R
-dB over 0 2 6 12 20 40 00
-dB
LINE
TIME
REC REMAIN L
R
-dB over 0 2 6 12 20 40 00
-dB
LINE
5a. DISPLAY button
Push and release to tab through
alternate information displays.
Display information is slightly different in Stop,
Record and Playback.
During Stop:
Default display is
Remaining record
time for the card.
remaining record time on card
Example display
After the first push
track information is
displayed.
Total tracks on CF card.
After the second
push EDL mark
information is
displayed.
Total EDL marks on CF card.
After the third
push file parameters
are displayed.
bit rate sampling frequency
compression
algorithm recording
channels
After the fourth
push Date and
Time information is
displayed.
Current clock time
hours:minutes:seconds
After the fifth push the display returns to the default:
remaining record time on the CF card.
During Record:
Default display is
elapsed Record time
on the current
track*. Record time on track
The first push of the DISPLAY button switches to
remaining record time for the card.
The second push switches to file parameters.
The third push switches to date and time.
The fourth push returns to the default.
*When there are 5 minutes of recording time remain-
ing on the CF card, the display automatically switches
to indicate remaining recording time on the CF card.
During Playback
the default display
is elapsed time on
the current track.
elapsed time
The first push switches to track time remaining.
The second push switches to file parameters.
The third push switches to date and time.
The fourth push returns to the default.
5b. LOCK button
LOCK
Push and hold
SHIFT
while you push
and release the DISPLAY button
to
LOCK
(or unlock) the keys (buttons
and controls) on the PMD570.
KeyLocked is displayed briefly.
Example
display
You can use LOCK to prevent front panel control of
the PMD570.
When locked attempting to use controls (buttons or
Jog Wheel) results in a brief "Locked" display.
Example
display
To unlock push and hold
SHIFT
while you push and
release the DISPLAY button. "UnLocked" is displayed
briefly. Powering off and back on also unlocks the
controls.