Marantz PMD570 - Manual (Page 23)

BALANCED IN R L
R E F = + 1 6 d B u / 0 d B F S
+ 24 + 24
GROUND
HOT (+) COLD (-)
2 1 3 L
R
IN OUT
ANALOG DIGITAL
IN
OUT
(SPDIF)
I / O RS 232C REMOTE2
RISK OF ELECTRIC SHOCK DO NOT OPEN
C A U T I O N
UL C US LISTED
AUDIO SYSTEM 69 FM
S E R I A L N O .
WARNING: SHOCK HAZARD- DO NOT OPEN.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
A C I N
MODEL NO. PMD570
AC120V 60HZ 0.5A
MADE IN JAPAN
REMOTE1
6 7 8
- 23 -
Back continued
RS 232C
6. RS-232C connector
Using serial communication, a
host device can control the
PMD570.
• The RS-232C host can control functions of the
PMD570 externally.
• The PMD570 automatically transmits status data
when status is changed.
• The PMD570 will respond to a status request by
transmitting the associated status data.
See RS-232C control, page 47, for details.
With Marantz Professional's PMD570 control setup
application (check the enclosed CD ROM or see
www.d-mpro.com to download) you can control the
PMD570 from your PC. See page 46 for a brief
description of the application.
7. REMOTE1 jack
REMOTE1 accepts a remote (not
supplied) that connects via a
TS 1/4 inch plug. REMOTE1
Wiring
diagram
A connected switch
on closing and on
opening does the
following depending
on the Remote Menu setting.
Remote Menu setting:
StartPause
Close to start open to pause during recording or
playback. If Auto Mark is ON and EDL mark is
added when recording resumes.
StrtPausTR
Close to start, open to pause during recording or
playback. Start after a record pause, continues on
the next track.
EDL Mark
During record or playback close to add an EDL
mark.
Manual TRK
During recording, close to increment the track. A
new track is created at that point. There is no
break in recording.
8. AC IN
Connect the 3 prong AC
power cord.
A C I N
REMOTE1 behavior depending on switching activity:
open closed
open closed
Remote Menu setting
StartPause StrtPausTR EDL Mark Manual TRK
Start
Start
next track
Pause Pause - -
add
EDL mark
create
new track
CAUTION:
Only use the supplied power cord.
Menu mode
Presets
Three menu selectable Presets make it easy to switch
between commonly used input, recording setup, and
playback conditions. Called Preset1, Preset2, and
Preset3.
How to switch Presets
From stop, push and release the MENU/STORE
button to enter Menu mode.
The currently selected Preset (1, 2 or 3) will be
displayed and flashing.
Turn the Jog Wheel to scroll through Presets 1, 2 and
3. Push and release the Jog Wheel to select the
displayed Preset.
L
R
-dB over 0 2 6 12 20 40 00
-dB
LINE
TIME
REC REMAIN
The Input menu for the selected Preset will be
displayed.
You can edit the menu for the chosen Preset.
To accept the menu settings, push and release the
MENU/STORE button. The display returns to stop.