Marantz PMD570 - Manual (Page 35)

Auto Cue
Auto Cue skips the silence at the beginning of an
audio track and pauses playback at the point where the
audio begins (sound is loud enough for long enough).
You can adjust how loud (how many dB) and how
long (milliseconds) the audio has to be before play-
back is cued.
The Auto Cue Menu settings permit:
• turning Auto Cue On or Off
• adjusting the millisecond period in 5 millisecond
intervals from 5 to 95 milliseconds, and
• adjusting the margin sound level that defines
where audio begins in -5 dB increments from -20
to -60 dB.
If Normal Play Mode is selected (see Play Mode),
when the end of the track is reached Auto Cue pauses
playback cued to the sound of the next track.
Default settings are Off, 20 milliseconds, and -40 dB.
1. From stop push and release the MENU/STORE
button.
2. Turn the Jog Wheel to select Preset1, 2 or 3.
3. Push and release the Jog Wheel to accept the
selected Preset.
4. Turn the Jog Wheel so Auto Cue is displayed and
flashing.
- 35 -
-dB
-dB
-dB
-dB
-dB
Example
display
5. While Auto Cue is flashing, push and release the
Jog Wheel. The On or Off will be flashing.
6. Turn the Jog Wheel to toggle between On and Off.
Example
display
7. When correct, push and release the Jog Wheel.
The display switches to milliseconds flashing.
Example
display
8. Turn the Jog Wheel to tab through milliseconds
(05 - 95 milliseconds).
When correct, push and release the Jog Wheel.
The display switches to -dB flashing.
Example
display
9. Turn the Jog Wheel to tab through the margin
sound level choices (-20 through -60 dB in 5 dB
units). When correct, push and release the Jog
Wheel. The display returns to Auto Cue flashing.
10. If you are done making Menu changes to the
Preset, push and release the MENU/STORE button
to save your changes,
(or push and release the Stop CANCEL button
to cancel all changes).
Display returns to stop mode.
Note:
When Auto Cue is turned On, the PMD570 will
continue to search until audio of a significant level is
located within the playing track - where the unit will
then enter Play/Pause. To end this process, either
press stop or turn Auto Cue off in the menu.
stored will be
displayed
briefly