Tv back panel, Ant 1/main, ant 2/aux (antenna), Cablecard™ slot – MITSUBISHI ELECTRIC WD-52631 User Manual

Page 18: Input 1 and 2 inputs, Chapter 1. television overview

Advertising

Chapter 1. Television Overview

TV Back Panel

1. ANT 1/MAIN, ANT 2/AUX (Antenna)

If you are connecting an antenna, direct cable without
a cable box, or are using cable with a CableCARD™,
connect the main antenna or cable source to

ANT 1/MAIN.

ANT 1/MAIN and ANT 2/AUX can each receive both

digital and analog over-the-air channels from a VHF/UHF
antenna or non-scrambled digital/analog cable source.

ANT 1/MAIN and CableCARD™ (models WD-57731 and

WD-65731)
Use

ANT 1/MAIN to receive premium subscription cable

TV service authorized by the CableCARD™ access card.
The CableCARD access card is provided by your local

cable company.

ANT 2/AUX can continue to receive

over-the-air or non-scrambled cable signals when

ANT 1

is used for CableCARD™ service.

2. CableCARD™ Slot

(models WD-57731 and WD-65731)

The CableCARD access card from your cable TV service

provider is inserted into this slot. When inserting, ensure
that the top of the card faces in the direction indicated by

CARD TOP .

If your cable company is not currently offering CableCARD
access cards, use the cable box provided and authorized
by your local cable company to view scrambled channels.

3. INPUT 1 and 2 Inputs

(Audio and Video)

INPUT 1 and 2 can be used to connect a VCR, Super

VHS (S-VHS) VCR, DVD player, standard satellite receiver,
or other A/V device to the TV.

INPUT 3 is a third set

of jacks located on or near the front of the TV for conve-

nience. Please note that if

S-VIDEO and VIDEO are

both available, you must choose to connect only one.

��

�

��

�

��

�

��

�

��

�

��

�

��

��
��

��

�

ANT1 / MAIN

ANT2 / AUX

ANT 1 and ANT 2

on WD-52631

Advertising

Popular Brands

Popular manuals