Antennas with separate uhf and vhf leads, Antenna with a single lead, Chapter 2. tv connections – MITSUBISHI ELECTRIC WD-52631 User Manual

Page 27: Figure 7. connecting a single antenna

Advertising

Chapter 2. TV Connections

Antennas with Separate UHF and

VHF Leads

Required: UHF/VHF combiner

This is not included with the TV, but is available at most

electronics stores.

1. Connect the UHF and VHF antenna leads to the UHF/

VHF combiner.

2. Push the combiner onto

ANT 1/MAIN on the TV

back panel.

��

�

��

�

��

�

��

�

��

�

��

�

��

��
��

��

�

��

Figure 8. Connecting separate UHF and VHF Antennas

Mitsubishi strongly recommends you avoid using
antennas with flat twin leads. Flat twin lead
antenna wires are subject to interference which
may adversely affect the performance of the TV.
We recommend using coaxial antenna cable.

Antenna with a Single Lead

A. For an antenna with flat twin leads
A 300-ohm-to-75-ohm transformer is required. This is not

included with the TV, but is available at most electronics
stores.

A1. For an antenna with flat twin leads, connect the 300-

ohm twin leads to the 300-ohm-to-75-ohm trans-
former.

A2. Push the 75-ohm side of the transformer onto

ANT 1

on the TV back panel.

B. For cable or antenna with coaxial lead

Connect the coaxial lead directly to

ANT 1 on the TV

back panel.

��

�

��

�

��

�

��

�

��

�

��

�

��

��
��

��

�

��

Figure 7. Connecting a Single Antenna

Advertising

Popular Brands

Popular manuals