Mocomtech CDM-QX - Manual (Page 149)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Ethernet Management MN/CDMQX.IOM
6–19
Modulator Parameters
(Available on the Tx and MD nested Config pages) – Click [Submit] once all the parameters have
been set in this section.
Demodulator Parameters
(Available on the Rx and MD nested Config pages) – Click [Submit] once all the parameters have
been set in this section.
Carrier-in-Carrier (CnC) Parameters
(Available only on the MD nested Config page) – See Chapter 9. DoubleTalk
TM
Carrier-in-
Carrier ® for complete details on using this feature. Note the following:
• Search Delay Range – Type the minimum and maximum values, in milliseconds, into the
provided text boxes.
• Freq Offset Range – Type the desired frequency offset range, in kilohertz, into the
provided text box.
• Re-Acquisition – Type the desired re-acquisition time, in seconds, into the provided text
box.
• Mode – Using the drop-down menu, select CnC mode as ON or OFF.
Click [Submit] once all the parameters have been set in this section.