Mocomtech CDM-QX - Manual (Page 214)

CDM-Qx/QxL Multi-Channel Satellite Modem with DoubleTalk™ Carrier-in-Carrier® Revision 7
Appendix B MN/CDMQX.IOM
B–2
3. Via the UTILITY: FAST submenu: Using the ◄ ► arrow keys, select Base, Slot1, Slot2,
Slot3, or Slot3, then press ENTER
.
FAST – Select the module:
Base Slot1 Slot2 Slot3 Slot4
Base refers to the base unit, where the redundancy and CnC options may be upgraded; the Slot#
refers to the populated module slots in the rear panel of the chassis – either a modulator or
demodulator module may be installed (the combination and quantity of modules will vary per
specific user setup).
4. If UTILITY: FAST Æ
Base is selected: The menu screen displays the chassis hardware
version on the top line, and the Base unit’s Motherboard Serial Number on the bottom line:
FAST: Config View (HW 1.02)
Board S/N: 123456789 (Base)
a. Record the Base Unit Motherboard Serial Number:
______________________________
5. If UTILITY: FAST Æ
Slot# (where # designates the chosen slot number) is selected:
FAST - Slot#1: Mod Turbo
(▲ ▼,ENT)
FAST - Slot#2: Demod Turbo
(▲ ▼,ENT)
As per the above examples, the selected menu screen indicates whether the installed module
is a Modulator, or Demodulator. Select Mod (Demod) or Turbo using the
◄ ► arrow keys,
then press
ENTER
.
a. If UTILITY: FAST Æ
Slot#
Æ
Mod (Demod) is selected, the module’s Board Serial
Number is identified on the bottom line:
FAST: Config View
Board S/N: 223456789 (Mod#1)
FAST: Config View
Board S/N: 323456789 (Dem#2)
Record the Module’s Board Serial Number:
______________________________
b. If UTILITY: FAST Æ
Slot#
Æ
Turbo is selected, the Board Serial Number for the
module for Turbo Product Codec (TPC) daughterboard is identified on the bottom line:
FAST: Config View
Board S/N: 423456789 (TPC#1)
Record the Module’s TPC Daughterboard Serial Number:
______________________________