System memory, Dip switch and jumper settings of the processors, 2 system memory – Microsoft G7VP2 User Manual
Page 12: 3 dip switch and jumper settings of the processors
Advertising
12
2
Hardware Installation
2.2 System Memory
2.3 DIP Switch and Jumper Settings of the
Processors
Make sure SW1 and JP5 are set correctly before applying power or
you may damage the processor or system board. There are 10
switches on SW1. The black rectangle in the diagram denotes the
part that is protruding, the adjustable switch.
In the example on the right:
Switch 1: Off Switch 6: Off
Switch 2: On Switch 7: Off
Switch 3: On Switch 8: Off
Switch 4: On Switch 9: Off
Switch 5: On Switch 10: On
Advertising