Microsoft G7VP2 - Manual (Page 38)

38
3
Award BIOS Setup Utility
3.1.2 BIOS Features Setup
The BIOS Features Setup allows you to configure your system for
basic operation. Some entries are defaults required by the system
board, while others, if enabled, will improve the performance of your
system or let you set some features according to your preference.
The settings on the screen are for reference only. Your version may not be
identical to this one.
Virus Warning
This category protects the boot sector and partition table of your hard
disk drive. When this item is enabled, the Award BIOS will monitor the
boot sector and partition table of the hard disk drive. If an attempt
is made to write to the boot sector or partition table of the hard disk
drive, the BIOS will halt the system and an error message will appear.
After seeing the error message, if necessary, you will be able to run
an anti-virus program to locate and remove the problem before any
damage is done.
Many disk diagnostic programs which attempt to access the boot
sector table will cause the warning message to appear. If you are
running such a program, we recommend that you first disable this
category. Also, disable this category if you are installing or running
certain operating systems like Windows ® 95/98 or the operating
system may not install nor work.
ROM PCI/ISA BIOS
BIOS FEATURES SETUP
AWARD SOFTWARE, INC.
Virus Warning
CPU Internal Cache
External Cache
Quick Power On Self Test
Boot Sequence
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Memory ECC Function
Typematic Rate Setting
Typematic Rate (Chars/Sec)
Typematic Delay (Msec)
Security Option
PCI/VGA Palette Snoop
OS Select For DRAM > 64MB
HDD S.M.A.R.T. Capability : Disabled
: Enabled
: Enabled
: Enabled
: A, C, SCSI
: Disabled
: Disabled
: On
: Disabled
: Disabled
: 6
: 250
: Setup
: Disabled
: Non-OS2
: Disabled Video BIOS Shadow
C8000-CBFFF Shadow
CC000-CFFFF Shadow
D0000-D3FFF Shadow
D4000-D7FFF Shadow
D8000-DBFFF Shadow
DC000-DFFFF Shadow : Enabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
ESC
F1
F5
F6
F7 : Quit
: Help
: Old Values
: Load Fail-Safe Settings
: Load Optimal Settings
↑↓→←
PU/PD/+/-
(Shift) F2
: Select Item
: Modify
: Color