Marantz SR4003 - Manual (Page 21)

17
ENGLISH
BASIC
CONNECTIONS
BASIC OPERA
TION
ADV
ANCED
CONNECTIONS
SETUP
ADV
ANCED
OPERA
TION
TROUBLESHOOTING
OTHERS
NAMES AND FUNCTIONS
BASIC OPERA
TION
REMOTE CONTROLLER OPERATION
To control the unit by your remote controller, you have to select the device AMP or TUNER by pressing the
SOURCE button. Please refer below for the details in AMP and TUNER mode.
AMP MODE TUNER MODE
SOURCE ON/OFF Turns the SR4003 on and off
POWER OFF Turns the SR4003 off
POWER ON Turns the SR4003 on
Z.SPKR Turns on or off Surround Speaker B
A/D Switches between the analog or digital inputs
ATT Reduces the input level
7.1 Selects the 7.1CH IN
SOURCE Selects a particular source component
AMP Selects AMP mode of remote unit
INPUT 3 / 4 Change the input selecter of SR4003
DISPLAY Changes the front display mode
MUTE Decreases the sound temporarily
SURR Selects the surround mode
VOLUME+/- Adjusts the over all sound level
TOP Back to the TOP of SETUP MENU
INFO Displays the current setting on the monitor
Cursor Moves the cursor for setting in "SETUP MENU" mode
ENTER Confi rms the setting in "SETUP MENU" mode
MENU Enters the "SETUP MENU"
EXIT Exits from SETUP MENU
T.TONE Enters the test tone menu
AUTO(1) Selects auto surround
STEREO(2) Selects STEREO mode
P.DIRECT(3) Selects the pure direct mode
SLEEP(4) Sets the sleep timer function
NIGHT(8) Turns on or off NIGHT mode
V-OFF(9) Turns on or off video output
HT EQ(CL) Turns on or off HT-EQ mode
CH SEL(0) Calls up CH LEVEL ADJUST and adjusts speaker levels or 7.1ch input
level
TV POWER Turns the TV on and off
TV INPUT Selects the TV video input
TREBLE-/+ Adjusts the tone control of high frequency sound
BASS-/+ Adjusts the tone control of low frequency sound
Z.SPKR AMP function enabled
A/D AMP function enabled
ATT AMP function enabled
7.1 IN AMP function enabled
SOURCE AMP function enabled
AMP AMP function enabled
INPUT 3 / 4 AMP function enabled
DISPLAY AMP function enabled
MUTE AMP function enabled
SURR AMP function enabled
VOLUME+/– AMP function enabled
INFO Shows preset information
TUNE 3 / 4 Tunes a frequency station up and down
PRESET + 2/– 1 Selects a preset station up and down
EXIT/MEMO Enters the tuner preset memory numbers
T.TONE AMP function enabled
T.MODE Selects the auto stereo mode or mono mode
P.SCAN Starts preset scan
BAND Selects a radio band
T.DISP Selects the display mode in RDS
PTY Displays the programme type information of the current station
F.DIRECT Selects the “Frequency direct input”
0-9 Inputs the numeric
CL Clears the inputting
TV POWER Turns the TV on and off
TV INPUT Selects the TV video input
• The remote controller dose not have the PRESET code library for this
device.