Marantz PMD325 - Manual (Page 16)

ENGLISH
12
NAMES AND FUNCTIONS
SCROLL/RECALL button
This is used to scroll the text display when text is displayed.
When it is pressed during program play, it is possible to
check which tracks have been programmed.
ENTER button
This is used to enter the play function settings.
Q.REPLAY (quick replay) button
This is used to search backward from the current play
position for the time equivalent to the setting and resume
play.
Furthermore, operation is performed as the end monitor
using one of the play setting functions. In the case of the
end monitor, play is resumed from the position, which is a
number of seconds that has been set, before the end
position of the track now playing.
Rear panel
ANALOG OUT (analog output) connectors
The music signals during play are output from these
connectors.
DIGITAL OUT COAX. (digital coaxial output)
connector
The music signals during play are output digitally from
this coaxial output connector.
* Digital signals are not output during MP3 file play or pitch
control play.
DIGITAL OUT OPT. (digital optical output)
connector
The music signals during play are output digitally from
this optical output connector.
* Digital signals are not output during MP3 file play or pitch
control play.
REMOTE CONTROL IN and OUT connectors
Using the remote control connecting cable, these
connectors enable this player to be connected to a
Marantz component equipped with remote control
connectors. These connections make it possible to control
an entire system that centers on the amplifier or other such
component.
EXTERNAL/INTERNAL switch
Before the player was shipped from the factory, this switch
was set to INTERNAL to enable the remote sensor built
into the player to be used.
Before using the connecting cable to make the connection
between the player and the remote control connectors on
a Marantz equipment, set the switch to EXTERNAL.
Note:
* Signals cannot be received from the remote control
unit if the switch is kept at EXTERNAL when the player
is to be used on its own.
CONNECTION
1 GND
2 HOT (+)
3 COLD (-)
RS232C CONTROL I/O
DIGITAL OUT
(SPDIF)
OUTPUT LEVEL
2
3
1
L
R
REMOTE CONTROL
OPT. COAX.
ANALOG OUT
EXTERNAL INTERNAL
IN
OUT
DIGITAL OUT
BALANCED
R L
A-B (A-B repeat) button
This is used to set start point (A) and end point (B) when a
particular section is to be played repeatedly.
CANCEL button
This is used to cancel the programmed tracks.
TIME button
This switches the main display from the text display to the
time display. It can also switch the time display during
play.
It can display how much time has elapsed and how much
play time remains for the current track as well as how much
time has elapsed and how much play time remains for the
whole disc.
During MP3 file play, it displays the elapsed time only.