Marantz PMD325 - Manual (Page 24)

ENGLISH
20
• Program play in the text display mode
In the case of a CD-TEXT disc, tracks can be selected by title
for program play.
If the main display is set to the time display mode, press the
TEXT button on the remote control unit to establish the text
display mode.
1.
During stop, press the PROGRAM button on the remote
control unit.
“Program” appears for an instant on the main display. Then
the PROG indicator flashes, and the program mode is
established.
2. Press the and buttons on the remote control unit
or use EASY JOG on the player to select the track. (The
track can also be selected using the numeric buttons but
in this case the title is not displayed).
ADVANCED OPERATIONS
The title of each selected track is scrolled, and once it
has been scrolled, it is programmed automatically. If you
do not want to program the track, select another track
before the scrolling is completed.
3. Repeat step 2 to program the desired tracks in sequence.
Up to 30 tracks can be programmed.
4.
Once all the tracks have been programmed, press the
button on the player or remote control unit or press the
PROGRAM button on the remote control unit.
The PROG indicator stops flashing and lights up instead,
and the program is entered.
5.
Press the button on the player or the button on the
remote control unit. Play of the selected tracks now starts
in the programmed sequence.
Program play will start even when step
4 is omitted.
Program play can also be initiated using EASY JOG on
the player. (See page 30.)
Note:
* Programming in the text display mode cannot be
performed for tracks which have no text information for
their titles.
TEXT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
TEXT
TIME
SCROLL/
RECALL
MENU ENTER
RANDOM 9 7 8
PROGRAM 0 A-B CANCEL
TEXT
PROG
QUICK REPLAY
EASY JOG
PROGRAM 0 A-B CANCEL
PLAY/PAUSE
+
CUE STOP
JOG
-
PHONES LEVEL QUICK REPLAY
2 4 6 8 10
TTL TTL TIME
PROG
TEXT